More Information: https://github.com/Xinyuan-LilyGO/LilyGO-T-ETH-POE Product Detail :1. Compatible with PoE mode A (powered by data pair) and PoE mode B (powered by backup pair) and auto MDIX, allowing the use of straight and crossover Ethernet cables. 2. 20 needle footprint with 3.3V, V+ power and 15 ESP32GPIO are available for your application.3. The compact 75mm by 40mm footprint is compatible with 4 mounting holes of ordinary M2.5 or 4-40 screws. 4. A small programming/USB serial console sub-module has been created so that the Inter-POE module can be easily programmed to meet the user’s application needs. Funktion:Hardware SpecificationsChipsetESPRESSIF-ESP32-WROOM,LAN8720A Ethernet chip,SI3404 Power management chipBLIXT4MBSRAM520 kB SRAMKnappBOT,RestExternal DeviceTF Card Slot,Type-CInterface,PA2369NL 1825-S Transformer,HR861153C Ethernet-POE interfaceUSB to TTLCP2104Modular interfaceSD card,UART,SPI,I2C,PWM,I2S,ADCOn-board clock32.768MHz crystal oscillatorWorking temperature range-40 ° C ~ 85 ° CVikt26.85gStorlek70*52.3*17mmPower Supply SpecificationsStrömförsörjningsingångType-C USB5VHR861153C Ethernet-POE interface50VArbetsspänning2.7V-3.6VMaximum output currentAbout 1.2ALaddningsström500mAUSBType-C USBWi-FiStandardFCC/CE-RED/IC/TELEC/KCC/SRRC/NCC(esp32 chip)Protocol802.11 b/g/n(802.11n,speed up to150Mbps)A-MPDU and A-MSDU polymerization,support 0.4μS Protection intervalFrekvensomfång2.4GHz~2.5GHz(2400M~2483.5M)Överför kraft22dBmCommunication distance300mBlåtandProtoc
